Currently, the semi-closed condensate recovery equipment most manufacturers use many causes just came up a few months to install okay to use, and then it appeared condensate removal is not timely, backwater interfere with each other, some seriously affect the production, so One end of disuse goods figured atmosphere, causing a lot of flash steam for air emissions, there is a leak, hold water phenomenon. The effect of good semi-enclosed condensate recovery and return water temperature can be increased to about 70 ℃, due to the effect of heat transfer was poor, resulting in energy conservation is not complete. Closed condensate recovery steam heat exchanger system can solve the prevalent use of traps or unreasonable due to hydrophobic led to the "energy-saving and heat exchange" in contradiction hydrophobic conditions, multiple different pressure condensate can be co Net closing recovered by the same unit, condensate recovery will not interfere with each other, especially for the oil industry, the paper industry, the alcohol industry, the food industry (starch, instant noodles, fans, etc.), chemical industry, textile printing and dyeing industries. Closed condensate recovery using sealed recovery system to solve the problem is not completely open recovered energy saving, can 130 ℃ ± 5 ℃ temperature condensate directly into the boiler feed water use, to ensure that the entire operation process steam condensate Recycling in the closed state, no leakage. Closed condensate recovery highlights one of the eight, do not use the trap system centralized hydrophobic achieve big difference with high and low pressure steam equipment can be more than one shared network closed recycling, hydrophobic smooth, completely solve the hydrophobic group phase heat transfer equipment and energy efficiency contradictory issues. Second, the real closed recycling, improve production efficiency will be the basis of steam condensate completely recyclable! Third, the secondary steam extraction and reuse, high-temperature water closed water saving effect of significantly better than other products. Fourth, the use of anti-cavitation device specifically designed to address the pump cavitation problems, to ensure efficient operation of the recycling unit. Fifth, do not need to change the process, in parallel with the user's existing backwater systems are free to switch, easy to maintain favorable production continuity. Sixth, suitable for all steam conditions, based on your actual steam conditions tailor the most suitable for your device. Seven run automatically, without guards. Eight, an investment can be put in place, three to six months to recover costs.